***********************************************
  Roland Dr.STIKA README file for Windows95
***********************************************

WELCOME TO Dr.STIKA!

Thank you for choosing the Roland DG "STIKA".   We believe that Dr.STIKA will help you to be more productive and creative with Roland DG "STIKA".  This "Readme" file provides some important information to install Dr.STIKA.

If you are reading this file with Notepad, check 'WordWrap' in Edit menu so that you can read more easily.

Explanation here is assuming that you are already familiar with operations on Windows95.  The further information about operation on Windows95, please refer the user's manual from Microsoft Corp.


Table of Contents

1.  Summary 
2.  System Configuration
3.  Installation


========================================================
1.  Summary 
========================================================

Dr.STIKA is 32 bits Windows95 application, and you can draw such shapes like polygon by very easy operations.  Dr.STIKA makes use of TrueType fonts in Windows95 and provides capability to layout such shapes and texts quickly then output for STIKA to make labels and stickers.


========================================================
2.  System Configuration
========================================================

- PC, compatible with Windows95

- System Memory
The minimum 8MByte is required.

- Hard Disk
The free area of 1 MByte on your hard disk is required.

- Floppy Disk Driver
The 3 1/2" floppy disk driver is required to install from 2HD floppy disk.

- Operating System
Windows95 


========================================================
3.  Installation
========================================================

To install Dr.STIKA, please follow the procedures mentioned below.  You cannot run Dr.STIKA directly from this install disk.

Further definitions of term in this section:
Hard Disk         :  The current hard disk recognized as 'C' drive
Floppy Disk Driver:  The 3 1/2 floppy disk drive recognized as 'A' Drive
Click             :  Pressing and releasing the left side button of MOUSE


WARNING
- Please follow this procedure(use 'Setup program') for the installation.
- Please make sure this install disk is write-protected before starting installation.

Installation Procedure of Dr.STIKA

1.  Start Windows95.

2.  Insert the Install disk of Dr.STIKA into the floppy disk drive.

3.  Click "Start" button.

4.  Then click "Run..." from the "Start" menu.  

5.  By clicking the text box for [Open:] in the "Run" dialog box, the insertion point is indicated by a blinking cursor.

6.  Type "a:\setup".

7.  Click "OK" button,
- Setup program starts, and you will be able to proceed the installation procedure by following the messages on the screen.
- Setup program will make appropriate copies of files on your hard disk and will add the "Roland Dr.STIKA" folder in the "Start\Program" menu.

If you have further questions or problem, please contact to the authorized dealer of Roland DG products.



* "Microsoft" or "Windows" are the trademark of Microsoft Corporation registered in U.S.A. and in the other countries.

Copyright (C) 1996-1997 ROLAND DG CORPORATION
